How To Connect Tempo Wireless Headphones

BASS JAXX HP-0377 Wireless Headphone Instruction Transmission

one. Introduction

Congratulations, and thanks for choosing the Tempo Wireless Headphones. This manual will help you operate the Tempo Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices earlier using the Tempo Wireless Headphones.

Condom Rules

ii. Packaging Contents

3. Connectedness Diagram

4. How to employ

4.1 General Functions

iv.two. Pairing to Mobile telephone or other device

To use your Bluetooth headphones, you lot must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.

Pairing to a phone and Entertainment:

• Plough on your phone and ensure the Bluetooth function is activated.
• Plow on the headphones, enter the pairing fashion.
• Search your Bluetooth devices on your phone by following the phone'south instructions. Refer to your telephone'due south user transmission for more information.
• After a few seconds the phone will list the "BT TEMPO HP" as a find device. Select it and follow your telephone's instructions to select this pairing.
• Your phone will confirm the pairing, and then press Yes/OK.

four.3. Charging your headphones
For your safety, delight ever apply an advisable 5V input charger/Adapter to charge the production. DO NOT USE Quick Charging USB Adapter to accuse the production, as it might impairment the product.

Use the Micro USB Charging cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at O in headphones diagram on folio 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.

**Brand sure to keep the headphones charging for a minimum of 2 hours before initial utilize.

Warning:

• Y'all must select a qualified charger from a regular manufacturer.
• You must charge the Bluetooth headphones if it has non been used for more than 6 months.

five. Product Specification

• Commuter Diameter: forty mm ten 2
• Impedance: 32 Ohms
• Frequency Response: 20 Hz – twenty KHz
• Sensitivity: 102 dB +/- 3 dB
• ANC: -18 dB
• Power Supply: Li-ion Battery 3.7V 200 mAh
• Playing Time: 3 – 4 Hours
• Charging Fourth dimension: ii Hours
• Bluetooth Range: 32.8 Feet
• Bluetooth Version: 5.0

Micro USB Charging Cable Included

6. FAQ

1. Why is in that location no power even when the headphones is turned on ?
   Ans: Ensure the battery has been charged upwardly to two hr for initial utilize.
2. There is no sound when playback.
   Ans: Check the connection between headphones with phone or estimator, if the connectedness is not established, please connect again. Brand certain the headphones is paired and connected with your target telephone or other master device.

7. FCC Argument

FCC Statement

1. This device complies with Office xv of the FCC Rules. Operation is subject to the following two conditions:
   (i) This device may not cause harmful interference.
   (2) This device must accept any interference received, including interference that may crusade undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Function fifteen of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference volition not occur in a particular installation. If this equipment does cause harmful interference to radio or television set reception, which can be determined by turning the equipment off and on, the user is encouraged to endeavour to correct the interference by i or more of the post-obit measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit unlike from that to which the receiver is continued.
• Consult the dealer or an experienced radio/Television set technician for help.

RF warning statement:
The device has been evaluated to run into general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Safety instructions for the lithium battery and charging the product

• The input voltage to the product is 5V 1A.
• In order to charge the product in safe manner and reliable conditions, please but adopt certified appropriate charger/ adapter for charging the product.
• Only charge the product at ambient temperatures between 10 deg °C/ l deg °F and 40 deg °C/104 deg °F.
• Practise not heat higher up 70 deg °C/158 deg °F, e.g. Practise non expose to sunlight or throw into burn down.
• Switch off the product afterward use.
• Please note that nosotros won't take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may event in severe injury or loss of property, and nosotros cannot control the operating process during the time the user using this product.
• In farthermost cases, corruption or misuse of Lithium battery pack can lead to explosion, oestrus generation, fire development or smoke development.

FCC ID: 2ADM5-HP-0377

Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106

Proceed all relevant data for hereafter reference

Read More than Almost This Manual & Download PDF:

Documents / Resources

Post navigation

Source: https://manuals.plus/bass-jaxx/hp-0377-wireless-headphone-manual

Share this post